|
Meco
Omaha Cantilever Rack
Shelving Series
1000-5000
FOR
STORAGE AND EASY
SELECTION OF BAR STOCK,
PIPE, STRUCTURAL, TUBING
AND OTHER LONG ITEMS OR
WHERE UNINTERRUPTED
DECKING IS REQUIRED.
Meco
Omaha manufactures five
basic capacity series to
fit your storage
requirements – from
Series 1000 Medium Duty
through the Series 5000
Extra Heavy Duty.
Available in upright
heights from 6' to 20'
with 2' through 10'
brace widths (measured
on center). Arms are
completely adjustable on
3" centers to
accommodate an infinite
variety of items.
Straight arms are
available in nine
different lengths with
or without lips. Heavy
Duty and Extra Heavy
Duty arms are both
available in seven
lengths with or without
lips. Inclined arms are
available in seven
lengths with or without
lips. A wide range of
base sizes allows custom
designing of rack
systems to your
individual needs.
Uprights are punched on
both sides for
versatility and can be
used single sided or
double sided depending
on the size of base
used. Note that arms
must never be placed on
the back side of a
single-based upright.
MECO OMAHA CANTILEVER
RACKS are modular within
each basic capacity
series so that
additional arms,
uprights and cross
braces may be ordered at
any time to add to your
existing system.
Different sized arms may
be interchanged on racks
to further tailor your
racks to different uses.
Standard and Heavy Duty
arms (page 24) are
designed for use on
Series 3000, Series 4000
and Series 5000 uprights
only. Series 1000 and
Series 2000 components
are not interchangeable
with any other rack
series.
Single
sided uprights can be
converted to doubles
when used with longer
bases designed to
accommodate placement of
arms on both sides.
Upright capacities can
be computed by
multiplying the number
of arms per upright by
the individual arm
capacities—NOT TO EXCEED
TOTAL UPRIGHT CAPACITIES
LISTED. Arm capacity is
based on EVEN
DISTRIBUTION OF LOAD.
All racks are designed
for quick assembly and
come with complete
instructions and
hardware for
installation. Completely
adjustable MECO OMAHA
CANTILEVER RACKS
eliminate storage
problems. Heavy duty
steel construction
permits storage of
tubes, bars, structurals
and other long heavy
items that must be kept
off the floor. Bases can
be used for extra
storage.
Forklift easily loads
off and on arms and
bases. Fast, convenient
handling of heavy, long
unwieldy stock. Instant
accessibility to one
piece or a full load.
For longer materials,
simply add braces and
uprights to fit your
requirements. Specially
designed MECO OMAHA
CANTILEVER RACK systems
may be required to meet
your needs. MECO OMAHA
representatives will
work with you to develop
the most feasible and
economical rack system
for your special
situation. Special label
requirements can be met
at a additional cost.
Ask us to quote prices
and specifications for
rack systems not covered
in the MECO OMAHA
BUYER’S GUIDE.
Standard
color for all cantilever
rack components is gray.
Custom colors available
at additional cost.
SERIES 1000 MEDIUM DUTY
CANTILEVER RACK
EXCELLENT LOW COST
STORAGE SYSTEM • IDEAL
FOR MAINTENANCE
DEPARTMENTS AND TOOL
ROOMS
|
High quality
MECO OMAHA
Series 1000
Cantilever Rack
is designed for
use where
heavier
capacities are
not required.
This rack is
similar to our
popular heavier
duty racks
except for the
use of lighter
gauge steel and
smaller
dimensions of
component parts.
Available in 6',
7', 8', 10' and
12' single and
double sided
uprights with a
choice of eight
standard brace
lengths
(measured on
center) to
accommodate 12",
18", 24", 30",
36", 42" and 48"
straight or
inclined arms.
Arms are
completely
adjustable on 3"
centers up and
down the full
length of the
uprights. Two or
more uprights
can be assembled
into a
continuous
system. This
sturdy and
stable rack is
as convenient
and versatile as
the heavier duty
racks but priced
lower to reflect
the reduced
capacity.
Installation is
quick and easy.
Racks can be
tailored to your
individual
requirements.
Uprights
facilitate
manual loading
and unloading.
Open base design
affords easy
forklift
accessibility.
Ideal for
storing bar
stock, pipe,
tubing, lumber
and many
lightweight or
hard-to-stock
items that must
be kept off the
floor. |
 |
STRAIGHT ARMS have a
minimum pitch of 3/8"
per foot to compensate
for
deflection. Arm
capacities are based on
an evenly distributed
load.
INCLINED ARMS have a
pitch of 20 degrees or
approximately 4.36" per
foot. Arm capacities are
based on an evenly
distributed load.
SERIES 2000 MEDIUM-HEAVY
DUTY CANTILEVER RACK
STRAIGHT
ARMS have a minimum
pitch of 3⁄8" per foot
to compensate for
deflection. Arm
capacities are based on
an evenly distributed
load.
SERIES 3000 HEAVY DUTY
CANTILEVER RACK
UPRIGHTS FOR YOUR NORMAL
INDUSTRIAL STORAGE
REQUIREMENTS
SERIES 4000 STANDARD
HEAVY DUTY CANTILEVER
RACK
UPRIGHTS FOR YOUR
NORMAL HEAVY DUTY
INDUSTRIAL STORAGE
REQUIREMENTS
ARMS can be used on
SERIES 3000, SERIES 4000
or SERIES 5000 uprights
only. Capacities are
based on an
evenly distributed load.
Note that arm lips are
not intended to bear any
portion of the load.
ARMS can be used on
SERIES 3000, SERIES 4000
or SERIES 5000 uprights
only. Capacities are
based on an
evenly distributed load.
Note that arm lips are
not intended to bear any
portion of the load.
SERIES 5000 EXTRA HEAVY
DUTY CANTILEVER RACK
UPRIGHTS FOR STORAGE
REQUIREMENTS WHICH
DEMAND HEAVIER CAPACITY
RACKS
|
