|
Cantilever rack and
accessories and
heavyweight structural
cantilever rack
 |
|
 |
|
All MECO
cantilever arms
are factory
punched to
accept a bolt-on
lip at any time.
Lips can also be
removed when
they are no
longer required.
Lips are not
intended to bear
any portion of
the load. |
|
Pipe sockets can
be field
installed or
removed as needs
dictate—just
like bolt-on
lips. Inside
diameter of the
socket is 13/8".
Removable pipe
is not included.
Pipe sockets are
not intended to
bear any portion
of the load. |
| |
|
|
| |
|
|
 |
|
 |
|
Add a plywood
deck to the
cantilever
system to store
bulky items such
as boxes,
cartons and
furniture. MECO
will
pre-engineer the
saddles to
accommodate 2x4
cross supports.
Saddles must be
positioned along
the arm to
ensure equal
distribution of
weight. |
|
Reels, spools
and rolls can be
stored between
arms with the
addition of axle
cradles. Axle is
not included. |
Turn a
cantilever rack system
into covered storage
with MECO OMAHA roof
supports. Can be used as
single or double sided
roof (depending on
length of base used).
Purlin clips included.
NOTE: The use of roof
supports can
significantly reduce the
rack’s capacity due to
wind and snow loads.
MECO will custom design
the roof supports to
conform with local wind
and snow load
conditions.
MECO
offers optional steel
decks to withstand the
harshest industrial
environment. Ideal for
storage of short lengths
of material, dies,
castings and other items
that require an
uninterrupted length of
heavy duty decking.
Steel angles are welded
to the underside of the
deck for additional
strength. Arms and decks
are precision drilled to
accept mounting
hardware.
Structural Cantilever
Rack
Select
a MECO OMAHA Structural
Cantilever Rack system
when your load
requirements surpass
normal capacities.
Uprights are fabricated
from rugged structural
wide flange beams.
Heights are available
through 24 feet. Bolt
holes are punched on 4"
centers the full height
of the upright. Both
single sided and double
sided uprights are
available. Structural
bases are attached to
the uprights by heavy
duty, high strength
bolts. Load on bases
does not affect the
total upright capacity.
|
