|
Pallet Rack Shelving
MECO
OMAHA Structural Pallet
Rack is designed in
accordance with AISC and
RMI Standards. Upright
frames and load beams
are fabricated from
structural channel with
a minimum yield of
36,000 PSI. Beams are
secured to the upright
frames with plated,
heavy duty bolts and
nuts— cannot be
dislodged by forklift
impact; installation is
fast and easy with no
special tools required.
A wide range of frame
heights, depths, beam
lengths and load
capacities is available
to meet the most
demanding storage
requirements. Custom
pallet rack is designed
by a dedicated
engineering staff using
state-of the- art CAD
technology and years of
experience.
UPRIGHT FRAMES
Rigid, all-welded
uprights provide storage
capacity up to 52,200
lbs. per frame. Select
the height of upright
frames according to
existing ceiling
heights, sprinkler
systems, and forklift
limitations. Frame depth
is determined by the
length of the pallet:
Standard pallet overhang
is 3" front and back.
The stated capacity of
upright frames is based
on a maximum vertical
beam spacing of 60". A
vertical beam spacing of
less than 60" will
result in the same
stated capacity. The
vertical beam spacing
includes the distance
from the floor to the
top of the lowest pair
of load beams. If a
vertical beam spacing
greater than 60" is
required, contact your
MECO OMAHA
representative to
determine upright frame
capacity. Frames are
punched on 4" centers
for maximum beam
adjustability.
LOAD BEAMS
Special bracket allows
2" adjustability up and
down the frame. When
selecting the
appropriate beam length,
add a minimum of 10" to
two pallet widths or 14"
to three pallet widths.
Additional spacing may
be required for pallets
with excessive load
overhang. Using the Load
Beam Table of Capacity,
select the pair of beams
of the proper length and
capacity making sure not
to overload the beams.
NOTE: Capacities are
based on a uniformly
distributed load over a
pair of beams and are in
accordance with AISC and
RMI Standards.
Deflection does not
exceed 1/180 of the beam
length. Load beams and
related beam braces are
sold as an integral
unit.
STRUCTURAL RACK
ACCESSORIES
DRIVE-IN/DRIVE-THRU
STRUCTURAL PALLET RACK
THE MOST EFFICIENT
METHOD TO STORE LARGE
QUANTITIES OF SIMILAR
PALLET LOADS
MECO
OMAHA Drive-in Rack
installation.
Custom-designed for high
density storage and
efficient handling.
Satisfy
your high density bulk
storage requirements
with a drivein/
drive-thru system from
MECO OMAHA. Drive-in
systems allow forklift
entry from one direction
only—ideal for a first
in/last out inventory
system. Drive-thru
systems allow the
forklift to enter the
rack from either the
front or rear and move
pallets completely
through the structure.
This system works best
in a first in/first out
system. Both drive-in
and drive-thru racks
reduce the need for
conventional aisle space
and maximize warehouse
utilization.
MECO OMAHA
drive-in/drive-thru
racks are custom
designed to fit your
specific storage
application. Upright
frames, pallet support
beams and cross ties are
fabricated from
structural channel
providing optimum
strength and durability.
Upright frames are
punched on 4" centers,
special bracket allows
2" vertical
adjustability of rail
supports. Structural
angle load rails are
mounted to rail supports
by a special bracket
eliminating screws or
bolts on the rail
surface— pallets cannot
be damaged by
obstructions. All
connections are
accomplished with
plated, heavy duty bolts
and nuts—cannot be
dislodged by forklift
impact; installation is
fast and easy with no
special tools required.
Contact your MECO OMAHA
representative for
custom-designed drive-in
or drive-thru rack
systems. MECO OMAHA
sells
drive-in/drive-thru
structural pallet rack
to approved dealers
only.
|
