There are 3 restrictions that will have to be followed when placing these drawer bodies in the bulk rack unit. One, to minimize the gap between the top of the drawer front and the bottom of the beam, a 4-1/2” or larger drawer must be placed at the top position. Two, the light duty beams must be used in the 60” drawer in shelving applications. This is due to the height of the beam. Three, spacer beams are required; they will go in between the drawer configuration located approximately 36” from the bottom. The number (831515-2) comes in pairs assembled like the beams – one in front and one in back. You only need one pair per unit.
30”D x 60”W x 84”H with 3 Levels (solid steel decking), Closed Ends/Backs